- 28 -
Installation of the condensation hood
Put the condensation hood on the upper cover of the combi-steamer (section
4.1
“Technical specification”
) and assure good adherence. Make sure that the
supply cable is not blocked between the devices.
Remove the protective foil from the device before use. Remove the foil slowly in
order to not to leave the glue residuals. Any glue residuals may be removed with use
of proper solvent.
CAUTION!
Never remove the rating plate or any warning signs from the appliance.
Attach the condensation hood on the back wall of the
combi-steamer with use of the supplied plates and
mounting screws.
Connecting to the extraction connection
The spiral pipe is located on
the back wall of the condensation hood
and should be inserted to the extraction
connection of the combi-steamer.
Steam is collected and removed during
the operation of the condensation hood.
Vapours outlet
Combi-steamer
Spiral pipe
