- 21 -
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
5.2 Installation and connection
•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of
the device and which is table.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.3 Operating
o
Before the first usage one shall wash all the disassembled parts of the appliance (a
sieve, a container for juice, a pressing cone) in warm water with the use of delicate
cleaning agent. Then the parts shall be rinsed with pure water and left in the air to dry.
o
Put the container for juice on the engine block and then put the sieve into the
container.
o
Place the relevant pressing cone on the engine drive. The biggest cone shall be
used for pressing big oranges and grapefruits, the medium size cone shall be used
for oranges and the smallest cone shall be used for lemons and limes.
NOTE!
Due to the drive insert on the inside of the pressing cone, the big pressing cone
can only be used in connection with the medium one.
o
When preparing juice one shall remember about putting a dish under the juice outlet.
o
Prepare the citruses and cut them into halves.
