- 42 -
7. Cleaning
WARNING!
Before cleaning, disconnect the device from the power
supply (unplug!) and leave to cool off.
The device is not suited for direct washing via water jets.
Protect the device from the water penetration.
CAUTION!
Never use sharp or scouring cleaning agents which may scratch the surface
of the device.
Never use any cleaning agents containing gasoline or solvents.
o
Clean the device regularly.
o
Clean the
heating plate, control panel
and
housing
with a soft, damp cloth and
mild, not scouring, cleaning agent.
o
Clean the
dust and grease filter
regularly with a mild cleaning agent or in a
dishwasher. To do so remove the filter from the holder (fig. In section
4.2 “Overview
of parts
“
). When the filter has been cleaned place the completely dry filter in the
device.
CAUTION!
Do not connect the device to the power supply and start-up without the filter
to avoid injury and damage.
o
You must maintain the ventilation slots at the rear side of the device free of dust
and dirt, and clean if necessary (e.g. using a brush or blower).
o
After washing the device use a soft, dry cloth to dry and polish the surface.