Bartscher IK 35SK, Инструкция по эксплуатации

Страница: 15 / 16

- 30 -
6.3 Safety instructions for maintenance
o
Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o
In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o
Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
7. Possible Malfunctions
Error Message Cause Solution
E01
•
The device becomes too
hot (e.g. due to blocked
ventilation slots)
•
Parts are damaged (e.g.
transistor)
•
Clear/unblock ventilation slots.
Let the device cool off for a few
minutes; the device is ready for
operation afterwards.
Contact the retailer in case the
error message remains indicated
in the digitaldisplay after the
device has cooled off.
•
Contact retailer.
E02
•
Overheating-protection
was activated and the
device switched off.
•
Remove the cookware from the
hob. Let the device cool off for a
few minutes. The device is ready
for operation afterwards.
E03
•
Short-lasting power
surge or lower tension
•
Remove the device from the
socket (remove the plug!).
Re-connect the device after
several minutes.