Bartscher IK 20TS, Перевод оригинального руководства пользователя

Страница: 17 / 21

- 36 -
Power mode
•
Press the function key . The device switches to the Power mode.
Pre-set value of 1300 W is displayed.
The function key is lit constantly and the device is in the operation mode.
„Power“ and pan detection indicators are lit.
•
If the function key is not pressed within 1 minute,
an audio signal will sound and the device will automatically switch to the
Standby mode.
•
The induction cooker detects whether the suitable cookware was placed on the hob.
If so, the pan detection indicator is lit and the device works based on the
selected settings.
•
If there is no cookware on the hob or if it is not suitable, or the cookware diameter
is smaller than 12 cm, the pan detection indicator flashes and an audio signal
will sound until a suitable cookware is placed on the hob. If no suitable cookware is
placed on the hob within 30 seconds, the device will switch to the Standby mode.
•
When the device is in the power mode, by pressing the setting adjustment field
left or right you can at any moment change the settings within
the range from 500 W to 2000 W.
8 levels can be set. They are listed below:
500, 700, 900, 1100, 1300, 1500, 1700, 2000 W
The digital display will show the selected power value.
Power + time operation mode
•
When the device is in the power mode, press the function key to switch to time
settings.
•
By pressing the setting adjustment field
left or right you can
select one of the 8 time settings within a range from 5 minutes to 180 minutes:
5, 15, 30, 50, 75, 105, 140, 180 minutes.