- 27 -
place a new UV-A neon tube (Bartscher code-no. 300330) in the holder;
locate the cover in the slots of the support;
plug the device in the mains if it is necessary.
Replacement of adhesive sheet
NOTE!
For hygienic reasons, replace the adhesive sheet regularly.
Follow the instructions:
take out the cover and remove the adhesive sheet;
place a new adhesive sheet and remove protective film;
place the cover back in the slots of the support;
having completed the above, the device is ready for use.
•
If the device is not used any longer, disconnect it from the power supply (pull the plug!).
•
If the device is not used for a long time, remove the adhesive sheet from the
device. Clean the device according to the instructions in section 6 „Cleaning“.
Store the device in dry, clean place protected against frost and direct sunlight and
inaccessible to children. Do not place any heavy objects on the device.
6. Cleaning
CAUTION!
Disconnect the device from the power supply (unplug!) before
cleaning. Let the device cool down.
The device is not designed to be rinsed with running water.
Do not use a pressure washer to clean the device!
Be careful and do not let the water into the device.
CAUTION!
Never use aggressive or coarse cleaning agents such as scouring powder,
alcohol, solvents or other substances that could damage the device’s
surfaces.