Bartscher IF-100 300318, Инструкция по эксплуатации

Страница: 27 / 81

- 26 -
Replacement of UVA neon tubes
If one of the neon tubes of the insect trap is damaged, it can easily be replaced by
another one with the same rating (observe the imprint on the neon tube!).
WARNING! Risk of electric shock!
Unplug the device from mains before replacing the neon tubes (pull the plug!).
To replace a neon tube, follow the procedure below:
tip up the middle grid to get an easier access to the neon tubes
(the figure below);
rotate carefully the replaced neon tube until it can be easily
removed from the socket;
remove the neon tube and install a new one with the same
rating in the holder.
close the middle grid and then connect the device to the
power supply.
•
If you do not use the device anymore, disconnect power supply (pull the plug!), then
pull out the power cord from the socket of the device.
•
For longer pauses in use, take out the used adhesive sheet from the device and
clean it according to the instructions in section 6.2 "Cleaning". Store the device in
a clean, dry, frost-free place, which is protected from the sun and reach of children.
•
Do not place heavy objects on the device.