Bartscher Hot display unit 8x1/6GN-R, Руководство пользователя

Страница: 15 / 17

- 30 -

The front glass pane becomes hot during the pre-heating, which should prevent
accumulation of condensed water on the pane when placing food in the hot display
unit.

In the meantime, prepare the required warm food .

Open the lifting door on the
operator side of the hot display
unit and fill up the GN containers
1/6 with warm food.

Close the lifting door of the hot
display unit to minimize
temperature loss.

The dishes will be kept warm at the selected temperature.

The temperature in the hot display unit during operation can be read from the
temperature indicator of the device (from the operator side).

When the temperature in the hot display unit falls down, the heating-up is on again
and the heating-up orange indicator is on again.

Remove the required food from the operator side and serve.

When the device is no longer to be used, turn the ON/OFF switch to
“O”
position and
disconnect the device from the power supply (unplug!).
The device is provided with
2 safety thermostats :
1. Automatic reset thermostat turns the device off in case of overheating (above
125 °C). In such a case, disconnect the device from the electric power supplly and
leave it to cool down. When it has cooled down, you can start using the device as
usual.
2. When the automatic reset thermostat is damaged and the device overheats, the 2nd
safety thermostat turns on at 150 °C and it switches off the device. In such a case,
contact the customer service or vendor.