- 24 -
•
The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.
5.3 Operation
Before first use
•
Before first use wash the device with warm water and a mild cleaning agent. Clean
with water again so as to remove detergents from the surface. Finally, wipe the
device dry thoroughly.
•
Attach the drip tray at the back of the device.
•
Plug the device into a correctly earthed electrical socket.
•
Heat the device without any food at the highest temperature setting for about 5 minutes.
If this is the very first use, some smoke may be present. It is not dangerous and smoke
should appear no more during further use of the device.
•
Turn the device off (set temperature adjustment knob to „OFF“ position) and allow it
to cool down.
Temperature setting
•
Temperature is infinitely variable and set with a temperature adjustment knob.
•
Set temperature by turning the adjustment knob clockwise to the required position
starting from „OFF“ position.
Temperature adjustment ranges are shown in the picture below.
Heating light
Temperature set at approx.50°C
Setting indicator
Temperature set at approx. 250 °C