Bartscher GM0311E, Руководство пользователя

Страница: 33 / 117

14
ENG
4.3 Save / change / delete regeneration / maintenance programs
With programmable appliances ( fig. 12 below ) it is possible to save regen -
eration/ maintenance programs and use them later.
IT is possible to save up to 10 different programs.
4.3.1 Saving regeneration/maintenance cycle
1
2
3
4
5
6
7
8
9
10
11
12
13
13a
13b
D
L1
L2
In order to save a program, select to activate the function of key book ( 4 ). Now use keys 5 and
6 and go to the number of the desired program.
Note: the empty programs will be signalled through the flashing pro -
gram number.
Press Enter ( 1 ) to confirm the selected program. The led L1 starts flashing
indicating that the system is currently programming the phase 1 .
Set the regeneration parameters as shown in point 4.2.3 .
Once you have programmed the desired phase/phases, press Enter ( 1 ) to
save the changes.
PRACTICAL PROGRAMMING DIAGRAM:
To set a program with: an initial regeneration phase at 80°C for 20 minutes
followed by a second regeneration phase at 95°C with core temperature of
65°C and a final maintenance phase at 70°C:
1. Press the key Book to access the programming menu.
2. Select the number of the program using keys + and - .
3. Press Enter to confirm the number selected.
4. Press the button Regeneration and set the chamber temperature
(FIG. 12)