57
•
Now proceed to programming individual cooking phases in the programme by
pressing button
T 11
. The LED display
D 4
will show the number of the cooking
phase "STEP 1". Set the parameters for this cooking phase.
•
To enter the next cooking phase, again press button
T 11
. The LED display
D 4
will show the number of the cooking phase "STEP 2". Set the desired parameters
for this cooking phase as well.
•
After entering all cooking phases, press button
T 16
and the selected programme with
cooking phases will be performed.
NOTE!
After the programme has finished, the device turns off. After the device has
turned off, this programme cannot be activated again as a programme cannot be
saved in the device's memory during manual operation.
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o
To ensure the device’s proper functioning, hygiene and power, clean it at the end of
every work day.
o
Before cleaning, disconnect the device power supply, close the water valve and
leave it to cool.
o
Remove the rails from the device and wash them thoroughly with warm water and
a mild cleaning agent; rinse in clean water and dry.
o
For washing the cooking compartment, use lukewarm water and appropriate cleaning
agents. Rinse the compartment thoroughly with clean water and ensure no residue
remains. Dry the cooking compartment.
