- 32 -
5.2 Operation
•
before the first use wash the device according to instructions in section 6 “Cleaning
and descaling”.
•
Pour required amount of fresh water to the device (only up to “MAX” mark).
•
It is important that the potable water is always present in the tank during the device
operation. Do not fill the device with any non-potable liquids, like acids, lyes, oils,
nitrates, etc.!
NOTE!
To reduce heating time warm water may be used. Time and energy
are saved in such way!
•
Put the lid on the tank and rotate it
clockwise to close the tank (bayonet lock).
•
Pay attention to position the steam outlet
hole in the lid in the front, above the fill level
indicator.
•
Connect the device to the single grounded socket.
•
Set required temperature in range from 30°C to 100 °C with use of temperature
control knob.
•
Turn the device on with use of ON/OFF switch. The orange heat up indicator will
come on during the heating phase.
•
The device needs approx. 35 minutes to boil water when completely filled. Then the
device switches to the keep warm mode and orange indicator comes on.
•
When water temperature in the tank drops to approx. 93°C, heating is activated again,
orange indicator comes on, and water is reheated to preset temperature.
•
Hot water may be used for preparation of required drinks (tea, coffee, instant coffee,
bouillon, etc.).
•
Keep in mind than various types of tea required different water temperature.
Follow the instructions on the packages.
Steam outlet hole
