Installation and operation
18 / 28
A120788
EN
The grilling process is carried out with the use of heat radiation of the lit up heating
element. The temperature generated by the IR radiation is very high, and the heat is
dissipated in one direction only (from top to bottom), thus this allows for instant
browning of the surface of food products.
NOTE!
The grill function may be used only independently. The hot air function
must be switched off, as these two functions may not be executed
concurrently!
The power of the grill heating element may be controlled and set between minimum
and maximum values, to obtain the expected browning level
— from golden to
brown.
The grill function should be executed with convection oven door closed, so as to
avoid the escaping of odours and smoke.
1. Switch the appliance on with the use of the main controller/time controller (rotate
it clockwise and set the required cooking/roasting time).
The green operation indicator light lights up, the internal lighting and fan motors
start right after the main controller/time controller is operated.
2. Use the middle temperature controller for the grill function to set the grill
temperature (up to 300°C).
The green grill function indicator light lights up.
As soon as the set temperature is reached, this indicator light goes off and lights up
again, when the temperature in the oven chamber drops.
3. Prepare food products for grilling (meat, fish, vegetables) and place them on the
right grill grate.
4. Apply small amount of oil onto the food products.
5. When the set temperature is reached, slide the grill grate with food products
onto the highest level of the convection oven.
6. Insert the fat collecting tray under the grate.
7. Observe the grilling process all the time, as the heating element's heat radiation
has very high values and food products may get burnt easily.
8. When the top surface of the products is browned, open the convection oven
door, remove the grill grate, turn the food products and reinsert the grill grate
into the convection oven, so that the food products are grilled from both sides.
9. After the grilling process, remove the prepared dishes.
5. When the appliance is not to be used any more, switch it off (rotate the main
controller/time controller to '
0
' position). Disconnect the appliance from the
mains socket (pull the plug out).
Содержание AT 120
Страница 1: ...AT120 A120788...
