Installation and operation
20 / 26
A162828
EN
4. Fry the food.
5. After frying, carefully remove the basket using the
handle and use the hook to hang the basket on
the fixture for hanging on the control box.
6. Wait for the excess of fat to drip off of the fried
products.
Fig. 5
7. When the frying process and operation of the appliance are completed, rotate
the push rotary control knob to '0' position, and switch the ON/OFF switch to 'O'
position.
Draining off and Removal of Frying Oil / Liquid Fat in Cube (Block)
ATTENTION!
The used frying oil / fat in cube (block) should be disposed of according to
provisions of law on environment protection and local regulations in force.
1. The frying oil / liquid fat in cube (block) should be replaced when it no longer
fulfils legal requirements.
NOTE!
If the fat from cubes (blocks) hardens in the fryer, it may only be melted
with the melting point function; then, the fat should be drained through the
fat drain tap.
2. After cooling, the frying oil or fat in cube (block) should be drained from the
basin via fat drain tap into a suitable container. Make sure that the container is
placed stably.
