Possible Malfunctions
A150974
17 / 20
EN
11. After cleaning, dry and polish the surface with a soft cloth.
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Error
Possible Cause
Solution
The appliance is
connected to the
power supply; the
appliance is switched
on but the green
indicator light in the
ON/OFF switch is off.
Abnormal or interrupted
power supply.
Check the power supply and
the cable for damage or faults.
Electric power supply
safety fuse damaged.
Check the fuse, connect the
appliance to another socket.
No power supply.
Check electric power supply.
The safety thermostat
tripped.
Leave the appliance to cool
down and press the RESET
pin located at the bottom of
the appliance.
The appliance is
connected to the power
supply, switched on,
but the digital displays
of the push rotary
control knobs do not
show any values.
Plug improperly
inserted into a socket.
Remove the plug and insert it
properly in the socket.
The push rotary
temperature or time
control knob is not
activated.
Press one of the push rotary
control knobs.
