Installation and operation
12 / 20
A150974
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.
5.2
Operation
WARNING!
Risk of burns!
When in use, the grill plates and external surfaces of the appliance get
very hot.
Do not touch hot surfaces.
When operating the appliance, you may touch just the handle or the
control elements (temperature controller, ON/OFF switch).
Before the first use
1. Before use, clean the appliance, observing instructions in section
6 “Cleaning”
.
2. Insert the grease collection tray at the front of the appliance, under the grill
plate.
3. Before the first use, heat the open appliance up without grilled products for
approx. an hour with temperature set to 180 °C
– 200 °C. Observe indications in
the
“Switching on”
section.
Due to post-production remains, there may be a smoke produced during heating up.
This is, however, no threat to the user and is not sign of any defect of the appliance.
That smoke will not occur during the next use. Ensure proper ventilation during first
heating.
4. Moisten the grill plates with food oil three or four times.
