- 19 -
Check the power cord regularly for damage. Do not use the
device if the power cord is damaged. If this cable is damaged, it
must be replaced by customer service or a qualified electrician in
order to avoid dangers.
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the
electric shock
hazard
will occur.
Never immerse the device, the power cord and the power plug
in water or other liquids.
Do not use any acid agents and make sure no water ingresses
the device.
Never
operate the device with moist hands or standing on wet
floor.
Remove the plug from its socket:
-
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
HOT SURFACE! Burn hazard!
To avoid the hazard results please follow the safety instructions
below.
During the operation and directly after its completion, the inner
lid and inner pot are very hot. Do not touch these surfaces with
bare hands. To open the lid use its handles and in order to
remove the inner pot use the handles of this pot.
