Bartscher 8L Plus, Руководство пользователя

Страница: 22 / 26

Cleaning
20 / 26 165118
EN
Exchange and removal of frying oil / liquid fat in cubes (blocks)
1. The frying oil / liquid fat in cubes (blocks) should be replaced regularly when it
no longer fulfils legal requirements.
2. After cooling, the frying oil / fat in cubes (blocks) should be drained from the
basin via fat drain tap into a suitable container.
3. Make sure that the container is placed stably.
NOTE!
Remove used frying oil / fat with care for environment and according to
the valid regulations.
6 Cleaning
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
1. At the end of a working day clean the appliance thoroughly.
2. If placed on the basin, remove the lid and rake out the frying basket from the
basin.
3. After cooling down, observe instructions in section 'Exchange and Removal of
Frying Oil / Liquid Fat in Cubes (Blocks)' and empty the basin.
4. Remove the perforated sheet from the basin.
5. Wash the frying basket and lid in warm water and mild cleaning agent. Heavily
soiled elements may be immersed for a short time.
6. Wash the basin with warm water and mild cleaning agent. Drain the water to a
suitable container via the drain tap. Rinse with fresh water and drain the water
via the drain tap to rinse the tap.