- 26 -
5.3 Operating
•
Electric patio heater with quartz heater pipes is switched on by use of pull switch with
heat-level indicator light.
•
While device is being switched on, some vibration occurs that lasts for a few
seconds.
•
During first use of pull switch with heat-level indicator light, the patio heater is set at
first degree: 630 W (standard-level energy).
•
Next action on the pull switch initiates the second degree: 1250 W (mid-level energy).
•
3rd degree: 1800 W (full power) becomes switched on by a third pull of the switch.
•
Patio heater inclination angle
①
is
regulated (0° ~ 45°). Before changing the
inclination angle, switch off device first and
leave it to cool off for 15 min (ill. 5).
WARNING! Burn hazard!
Patio heater extremely heated during use!
Never change inclination angle during use.
•
Height of patio heater can be regulated (1,80 to 2,10 m). In order to effect this, pull up
the extension pipe
③
from the upper pipe stand
⑦
, until desired height is reached.
Next, set extension pipe, turning the base casting
⑥
in order to effect this.
•
In order to switch off device, pull the pull switch with heat-level indicator repeatedly,
until „0” becomes displayed on the indicator. Next, disconnect device by pulling the
plug out!
①
