- 32 -
Setting the desired temperature (desired value)
The temperature of the device can be regulated between 2 °C and 10 °C
To set or change the desired value:
briefly press the button
, the value on the digital display will start flashing;
increase or reduce the value as needed using the buttons
or
;
confirm the value entered by pressing the button
.
If no button is pressed in the next 10 seconds, the digital display will show the
temperature inside the device.
Turning lighting on/off
The device is equipped with 2 LED lighting strips along the sides of the door frame.
The internal LED lighting may be turned on by briefly pressing the button
.
To turn the lighting off, press the button
again.
Automatic defrost
The device’s automatic defrost cycle runs 4 times every 24 hours.
Manual defrost
If you wish to defrost the device outside its automatic defrost cycle, press and hold
the button
for 6 seconds.
The LED defrost indicator
will come on and will flash until the defrost cycle is complete.
The LED defrost indicator
will go off and the next defrost cycle will begin in 6 hours.