- 30 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Before the first use, the refrigerated display should be installed and left standing
for at least 2 hours before it is connected to the power supply.
After a power failure or removal of the plug, do not reconnect the device to the
power supply for at least 5 minutes.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
5.2 Operation
Preparation
Read this instruction manual before you start the device.
Before first use, clean the device, removable top glass and removable baseplate
according to the instructions in point
6. ”Cleaning“
.
Place the baseplate on the lower surface of the device and the top glass onto the
body of the device.
Connect the device to a single grounded socket. Turn on the device with the on/off
switch located at the operator side. The switch integrated indicator (red light) comes
on.
The digital display shows the set temperature value, and the LCD cooling indicator
comes on.
Place food in the refrigerated display only after the device has reached sufficient
cooling power. Take into account the instructions included in point
“Cooling food
products“
.
