Bartscher 401-1Z-W, Быстрый старт

Страница: 13 / 18

Installation and operation
A1515002 11 / 18
EN
Wall-Mounting
ATTENTION!
•
Wall mounting may be executed only on fire-proof walls.
The appliance is ready for wall-mounting, as it features an attachments at the back.
The distance between the attachments is 535 mm.
1. Prepare suitable mounting materials (studs, screws). They are not part of the
delivery.
2. Mark 2 points in a suitable location on the wall to drill holes; observe the
distance given above.
3. Drill 2 holes in the wall.
4. Insert studs in the drilled holes.
5. Drive in screws.
NOTE!
Do not drive in the screws to the end, but leave a sufficient clearance, to
be able to hang the appliance on the screws.
6. Hang the appliance on the installed screws.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.