Bartscher 286613, Инструкция по установке, использованию и техническому обслуживанию

Страница: 5 / 14

12/12
1935/2004/UE - Food Contact Material (MOCA)
And the particular reference norms.
Declaration of compliance
The manufacturer declares that the appliances of their production meet the above mentioned EEC
directives and requires that installation be done observing the norms in force, particularly regarding
the system for letting out fumes and air exchange.
PROVISIONS FOR INSTALLATION
Place
It is advisable to install the appliance in a well-
ventilated room or under an extractor hood. The
appliance may be installed as a single unit or together
with others. In both cases, if it is installed near a wall of
inflammable material, a minimum distance according
the series (see figure) from the side and back walls must
be observed. In the event that it is not possible to
observe this distance, protective measures must be
taken (e.g. use of sheets of refractory material) which
ensure that the temperature of the walls is within the
established safety limits.
Norms and provisions
Installation operations, gas or voltage conversions to other than the original, starting up the
installation or appliance, ventilation, letting out fumes, and maintenance have to be done by
qualified personnel following the manufacturer's instructions, observing the norms in force and in
compliance with the following provisions (
GB ):

Gas Safety (Installation and Use) Regulations, 1984

Health and Safety at Work Act, 1974

Codes of Practice, BS6173, 1982

The Building Regulations, 1985

The Building Standards Regulations, 1981
For others countries follow the relevant local rules for:

Gas board rules

Building regulations and local fire prevention provisions

Safety norms in force

Provisions of the Gas supplying company

The Electrical Norms in force

The Fire Brigade rules.