- 26 -
5.2 Installation and connection
CAUTION!
The installation and maintenance of the appliance should only be carried out by
trained personnel!
•
Discard the complete packing material after unpacking the device.
•
Remove the protective foil from the appliance. Ensure that it has been completely
removed.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
NOTE!
This appliance is not suitable for built-in use nor for being set up in multiple in-
line series.
•
Place the appliance in well-ventilated rooms.
•
Keep a minimum safety distance of at least 20 cm to walls or other objects.
•
Arrange the appliance so that the power plug and control panel are easily accessible.
•
Do not place inflammable acidic or alkaline materials or cloths close to the appliance
since this may reduce the operational life of the appliance and may involve the
danger of deflagration.
•
The rear side of the appliance is fitted with an earthing pin. Please connect the
earthing cable to a copper wire ( minimum diameter 2 mm²) in accordance with the
generally applicable safety regulations.