![background image](http://html1.mh-extra.com/html/bartscher/173-195/173-195_instruction-manual_476899017.webp)
- 36 -
6.3 Safety instructions for maintenance
o
Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o
In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o
Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
Regular greasing:
o
The carriage is to be greased regularly with a natural technical grease. In order to do
so put the slicer on its side and grease both ends of the carriage axle. Move the
carriage forward and backward in order to distribute the grease evenly. Remove the
excess grease with a cloth.
7. Possible Malfunctions
Problem
Cause
Solution
Device does not start
despite START button
being pushed
•
No power
•
Check whether the
device is plugged
correctly into a socket
Too much resistance
during cutting
•
Knife not sharp enough
•
Grind the knife
Slices are frayed
and/or have irregular
shape
•
Knife not sharp enough
•
Knife worn out
excessively
•
Grind the knife
•
Contact authorized
service point
Carriage moves
incorrectly
•
Carriage axle not
greased enough
•
Grease carriage axle
Knife cannot be
sharpened correctly
•
Sharpener elements are
worn out
•
Contact authorized
service point