- 3 -
Technical data
---------------------------------------------------------------------------
Name:
●
Insulated dispenser
Item number:
●
150981
Design:
●
Container: stainless steel;
base, feet, lid: plastic
Dimensions:
●
Ø 240 mm, H 450 mm (with fold-out feet)
H 390 mm (without fold-out-feet)
Content:
●
9,0 liters
Weight:
●
ca. 2.0 kg
---------------------------------------------------------------------------
Intended use
The Insulated dispenser is only suited to keep beverages hot or cold.
The Insulated dispenser Flask is not suited for milk and/or carbonated beverages.
Freshly pressed orange juice and other beverages containing residues like e.g. fruit
pulp are not suited, because they may clog the spout.
When filling in tea, make sure that there are no tea leaves, which may clog the
spout.
Safety notices
o
Do not use this flask if it does not function properly, if it is damaged or in case it was
dropped on the floor.
o
Do not use any accessories or replacement parts not recommended by the
manufacturer. This may cause damage to the device, and render the warranty
null and void.
Placement
o
Place the device on a level and safe surface, which is capable of supporting its
weight and protect it from tilting.
o
There are two ways to position the device:
without fold-out feet:: place the insulated dispenser directly on a supporting
surface, e.g. a counter.
with fold-out feet:
the plastic feet are bent outwards via the snap points. This
changes the installation height by approx. 6 cm. You can
place a vessel with a height of max. 95 mm below the tap.
GB/UK
