- 22 -
o
Connect the appliance to a single socket with grounding. Remember about setting
the
ON/OFF
button on
„O”
position.
o
Turn on the device with the help of
ON/OFF
button on
„I”
position.
o
Put the prepared fruit on the cut side on the pressing cone.
o
Push the fruit and twist it when pressing into both sides in order to press out the
whole juice.
NOTE!
Use the fruit of room temperature in order to make pressing easier.
NOTE!
When pressing a greater amount of fruit remember to regularly empty the sieve
and the sieve basket. Turn off the appliance before starting to empty them.
o
In order to avoid the overflowing of the draining board, empty it regularly while the
appliance is working.
o
After finishing juice preparation, turn off the appliance by means of setting the
ON/OFF
button in
„O”
position.
CAUTION!
The unused device shall be always disconnected from the source of power (take
out the plug!). The similar shall be done when placing or taking out the parts of
the citrus press.
6. Cleaning and maintenance
6.1 Safety advice
o
Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o
Do not use any acid agents and make sure no water ingresses the device.
o
To protect yourself from electric shock,
never
immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
