Operating Instruction
117723
31 / 68
EN
Setting Automatic Pre-Heating
The pre-heating function heats the
appliance to the desired temperature
before dishes to be thermally processing
are introduced.
If the appliance temperature is higher than
the one indicated for pre-heating the
appliance, it will automatically cool down to
the correct temperature.
'Pre-heating' is set automatically, but this
function can be modified after the 'Start'
key has been pressed, by pressing the
temperature displayed.
By pressing key 1 (Fig. 10) to the left or
right, this function may be enabled or
disabled.
NOTE: Automatic pre-heating must be
executed with empty oven chamber.
Fig. 10
Setting Thermal Processing Mode
Key 2 (Fig. 10) is factory-set as default to
Convection
thermal processing mode. By
pressing this key, the thermal processing
mode may be changed to
Mixed
or
Steam
. Additionally, you may set the
following thermal processing modes:
Hold
,
Message
or
Smoking
(Fig. 11).
Fig. 11
Thermal Processing Mode: Convection, Steam or Mixed
Setting Thermal Processing Temperature
By pressing key 3 (Fig. 10) you can set the oven chamber temperature. The
temperature that can be set varies depending on the selected thermal processing
method.
