Bartscher 115130, Оригинальное руководство пользователя

Страница: 15 / 26

Installation and operation
115130 13 / 26
EN
Preparation of the appliance
1. Before operating the appliance clean it according to the instructions in section 6
'Cleaning' .
2. Fill the appliance with water before use, paying
attention to the 'MIN' mark on the basin back wall.
When the water level is below the “MIN” mark, the
sensors installed below detect it and the appliance
does not start. The digital display shows
E001 error
message.
3. Always fill the appliance with water above the
“MIN” mark.
Fig. 2
4. Connect the appliance to a single mains socket with protective contact.
5. Start the appliance by pressing the ON/OFF key (1, Fig. 3).
The 'click' sound is heard. The digital display shows the current water temperature
in the basin.