Bartscher 105996, Руководство пользователя

Страница: 18 / 20

Cleaning
16 / 20 105996
EN
NOTE: The induction cooker switches off automatically when no new
setting has been introduced for 2 hours. The fan operates for some time to
cool down the electronics.
Overheating Protection
The device is equipped with overheating protection. When the critical temperature
is exceeded, the appliance will switch off for safety reasons.
NOTE: Never place an empty pot on the heating area. Heating up an empty
cookware/container activates the overheating protection system; an audio
signal will sound and the appliance will turn off. The digital display will
show “E02“ error code.
In such a case, remove the cookware/container from the heating area and leave the
appliance for a few minutes to cool down. Then you may freely start using the
appliance again.
6 Cleaning
6.1 Safety Instructions for cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
1. Clean the appliance regularly after the end of each working day, or more
frequently if needed.
2. Wipe the heating area, housing and control panel with soft, damp cloth and mild,
non-scrubbing washing agent.
3. Ventilation slots at the rear and bottom of the appliance should not be
obstructed with dirt or dust. Clean them regularly with a brush or a blower.
4. After cleaning, dry and polish the surface with a soft and dry cloth.