background image

 

 

 

 

- 14 - 

1. General information 

1.1 Information about the instruction manual 

 

This instruction manual contains information about the installation, operation and 
maintenance of the device and should be consulted as an important source of 
information and reference guide. 

Awareness of the safety instructions and instructions for use in this manual will ensure 
the safe and correct use of the device. 

In addition to the information given here, you should comply with any local Health and 
safety Controls and generally applicable safety regulations. 

The instruction manual forms part of the product and should be kept near the device and 
easily accessible for anyone carrying out the installation, servicing, maintenance or 
cleaning. 

 
 

1.2 Key to symbols 

 

In this manual, symbols are used to highlight important safety instructions and any 
advice relating to the device. The instructions should be followed very carefully to avoid 
any risk of accident, personal injury or material damage. 

 

  WARNING! 

This symbol highlights hazards, which could lead to injury. 
Please follow the instructions very carefully and proceed with particular attention 
in these cases. 

  WARNING! Electrical hazard! 

This symbol draws attention to potential electrical hazards. If you do not follow 
the safety instructions, you may risk injury or death. 

  CAUTION! 

This symbol highlights instructions, which should be followed to avoid any risk of 
damage, malfunctioning and/or breakdown of the device. 

NOTE! 

This symbol highlights tips and information, which have to be followed for 
an efficient and trouble-free operation of the device. 

 WARNING! Hot external surface! 

This symbol is a warning that the unit surface is hot when in use. Ignoring this 
warning may result in burns!  

Содержание 104.446














Отзывы: