- 19 -
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the
electric shock
hazard
will occur.
Never immerse the device, the power cord and the power plug
in water or other liquids.
Do not use any acid agents and make sure no water ingresses
the device.
Never
operate the device with moist hands or standing on
wet floor.
Remove the plug from its socket:
-
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
HOT SURFACE! Burn hazard!
To avoid the effects of this risk, follow the safety instructions
presented below.
The device surface gets very hot when the device is in use!
Do not touch it with bare hands. Hold the cups by ears while
removing them from the device.
The device remains hot also for some time after turning off, so
before cleaning or moving the device wait until it cools down.
Never
move the device when it is switched on.