background image

 

 

                                                                                      
Should you have any questions with regard to installation of your Boomstrut please contact your Chandler in the 
first instance or contact [email protected]  

 

Содержание DINGHY BOOMSTRUT

Страница 1: ...e aft end of the boom to flex the rods Units with rods which have been shortened will not be exchanged so be sure that the strut is suitable before doing so You may need to upgrade to the 44009 web strut if the 44001 dinghy strut does not support the boom The Dinghy Boomstrut assembly THANK YOU FOR CHOOSING THE BARTON DINGHY BOOMSTRUT INSTALLATION IS A FAIRLY STRAIGHT FORWARD OPERATION AND CAN BE ...

Страница 2: ... and 40 degrees with the boom The Boomstrut is designed to fit inside your current vang kicking strap tackle but in some cases it may be necessary to reposition attachment points of these blocks to allow sufficient room At this point mark the location for the mast fitting INSTALL MAST FITTING If the position of the gooseneck can be adjusted whilst sailing mark the lowest point then slide the Luff ...

Страница 3: ... rod at the cut IMPORTANT Do not shorten the total lengths of the rods by more than 130mm INSTALL BOOM WEB STRAP FITTING Ensure that the rod clamps are tight at the mast end With the Boomstrut in position lift the boom 20cm above horizontal and tie off the webbing strap tensioner line tight to the gooseneck fitting Fig no 1 Pull on the kicker to compress the rods and level the boom When sailing ad...

Страница 4: ...4 Should you have any questions with regard to installation of your Boomstrut please contact your Chandler in the first instance or contact sales bartonmarine com ...

Отзывы: