5
ASSEMBLY
1.
Attach the door knob (P) to one door (LEFT)
with two washers (AA) and two M4x8 screws
(BB). Repeat to complete the assembly of the
other door (RIGHT)
HARDWARE NEEDED:
2.
Attach angle iron (D) to the 1/4 table (C)
with M6x10 bolt (EE). Repeat this procedure to
complete the assembly of the rest of the three
1/4 tables.
HARDWARE NEEDED:
3.
Line up the holes in 1/4 table with the corresponding
holes on the other 1/4 tables, insert two M6x10 bolts
(EE) through holes, finger tighten two M6 nuts (DD).
Be sure that line 1 and line 2 are at the same level
and then fully tighten the bolts. Use another two
M6x10 bolts to fasten the two 1/4 tables. Repeat
procedure to complete the assembly of the rest of
the 1/4 tables.
HARDWARE NEEDED:
Содержание 96057
Страница 5: ...4 PARTS LIST A B C D F E H I M G J K L ...
