damages happening, please do not try to repair it by yourself, send it back
to the authorized service center as soon as possible. The damaged
charger may cause an electric shock accident.
i.
The best temperature for charging is between 10
℃
- 40
℃
. Make sure
the air hole of the battery and charger are uncovered during charging.
j.
Please pull out the plug when meet a bad weather.
k.
Please do not burn the battery or make it being short-circuited, it may
cause explosion.
l.
Keep the tool out of reach of children and other person who are not
familiar with it.
3.
Personal safety
m.
Stay alert, watch what you are doing and use common sense when
operating the tool. Do not use the tool while you are tired or still under
the influence of drugs, alcohol or medication. A moment of inattention
may result in series personal injury.
n.
Use safety equipment. Always use safety equipment such as mask,
helmet, safety cap, insulating shoes and etc to reduce the risk of
personal injury.
o.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes jewelry or
long hair can be caught in moving parts.
p.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may effect the tool
operation. If damaged, have the tool repaired before use. Many
accidents are caused by poorly maintained power tools.
q.
Please use the tool properly, the tool with correct power will do the job
better and safer at the rate for which it was designed.
r.
Do not put your fingers into the head of the tool during operating. Your
fingers could be pinched very severely.
MAINTENANCE AND SERVICING
The tool earns a high precise design, please use it properly and do not disassemble
it by unprofessional person, otherwise we will not responsible for the problems cause
by above misuse. Or we will carry out repair if the users are willing to pay for the
spare parts cost.
1.
Keep tool dry. Any water may corrode the tool surface, metal or electrics parts. If
contact water, take out the battery and assembly it back when the tool is fully
dry.
2.
Avoid great temperature fluctuating to the tool. Otherwise it will cause the plastic
housing to be deformed, shorten the life span of the electric parts and damage
the battery.
3.
Please do not use any chemical agent to wash the tool.
4.
In order to prolong the life span, please change the hydraulic oil per year.
5.
If the tool not used for a long time, please make sure the position stay on its
starting position, clear up the tool and paint the rustproof oil both to the tool and
accessories. Take out battery and put them into box and store the tool in a dry
surrounding.
6.
The sealing kit inside the tool will be abraded in some degree after using, when
the oil leaking a lot, please contact the distributor to replace the sealing kit in
timely.
www.barton-tools.com
www.barton-tools.com
