Barton Musical Circuits BMC052, Быстрый старт

Страница: 3 / 9

10.SAVE button – When pressed this will save the current offsets to the memory bank selected by
the CHORD knob.
11.LOAD button – When pressed or when the LOAD input goes high, this will load offsets from
the selected memory bank. Adjusting an OFFSET knob will override the loaded offset for that
output.
12.SELECT button – When pressed or when the SELECT input goes high, this will load a saved
chord using the logic determined by the SELECT toggle.
INPUTS
1. MAIN Input –
This is the main input, it is mixed with the AUX input and it's quantized output
appears at the OUT1 jack.
2. AUX input – This is an auxiliary input jack. The voltage is attenuated by the AUX jack and then
mixed with the MAIN input.
3.TRACK input – This input is normalized to +5V when nothing is plugged in. When this input
goes low (voltage is less than 0V) the module will ignore changes from the MAIN and AUX
voltages.
4.LOAD input – This initiates a load like hitting the LOAD button.
5.SELECT input – This initiates a select like hitting the SELECT button.
OUTPUTS
1-4. VOLTAGE OUPUTS –
The only outputs are the 4 quantized voltage outputs. OUT1
corresponds to the input, OUT2 corresponds to the input offset by OFF1, OUT3 corresponds to the
input offset by OFF2 and OUT4 corresponds to the input offset by OFF3.