Bartlett Genesis LT3140, Руководство по эксплуатации, Страница: 22 / 35

21
Output 4 Options – (Usually set as a factory option)
Output 4 has 3 modes for running vent fans (Options A, B, & C), one mode that uses
Output 4 to indicate the alarm has triggered (Alarm), and one mode for running elements in the
lid or floor of the kiln (Percent).
Option A – Used to control a vent. Output 4 can be programmed to be on or off during
each segment of a Custom program. During a Ceramic or Glass program, output 4 come on at
the beginning of the firing and turns off after the kiln has cooled to 150°F.
Option B – Used to control a vent. Output 4 can be programmed to be on or off during
each segment of a Custom program. Output 4 comes on at the beginning of a Ceramic or Glass
program, off at 1450°F, back on after the firing is complete and the kiln has cooled to 1000°F
and finally off again when the temperature is below 150°F.
Option C – Used to control a vent, an alarm, or other atmospheric control. Output 4 can
be programmed to be on or off during each segment of a Custom program. Output 4 is off
during Ceramic and Glass programs.
Alarm – When this option is selected, Output 4 comes on when the alarm is triggered or
an error code is encountered.
Percent – Output 4 can be programmed to be on for a percent of the time Output 3 is
on. This option is used when Output 4 controls floor or lid elements. To ensure Output 4 stays
off at all times, use this option and set the percentage to zero.
Start Code
The Start Code is entered to start a firing. Enter any 4 number combination and press
“Save”. Default = 1. This will be entered anytime the kiln is fired.
Calibrate Touch
Used to re-calibrate the touch screen if buttons aren’t working properly. Press the
“Calibrate Touch” button and follow the onscreen instruction to re-calibrate.
Cost Setup
Enter the cost per kilowatt hour and the wattage for each zone in the kiln. The cost per
kilowatt hour has a minimum of $0.001 (1/10
th
of a penny) and a maximum of $9.999. This
information can be acquired from your electric company. The zone wattage has a minimum of
0 and a maximum of 50,000 Watts. This information can be acquired from the kiln
manufacturer or consult your kiln’s manual. If it a multi-zone kiln, you can enter the kiln’s
wattage in Zone 2, or divide the kiln’s wattage and split evenly between the 3 zones.
Example: The cost per kilowatt hour is 16 cents and the kiln is a single zone with a wattage of
16,000. Press Cost/KWH, type in 0.16 and press SAVE. Press Zone1 Watts, type in 0, and press
SAVE. Press Zone2 Watts, type in 16,000, and press SAVE. Press Zone 3 Watts, type in 0, and
press SAVE.