background image

BARTINGTON INSTRUMENTS

 

Page 9 of 10 OM4550/1

8. Storage & Transport

Your sensor is a precision electronic instrument and should be treated as such.

Note:

 Avoid exposing this instrument to shocks or continuous vibration.

Note: 

The sensor should be stored and transported in the original shipment packaging, or 

that of similar protective standard. 

Note: 

Store only within the temperature range specified in datasheet DS4550.

 

Caution:

 Do not expose this instrument to strong magnetic fields while being stored.

Caution:

 Take particular care when cleaning around electrical connections. Bent or 

damaged pins may cause the Mag900 & Mag901 to malfunction.

10. Environmental Precautions

Refer to datasheet DS4550 for maximum environmental, electrical and mechanical ratings.

Caution: 

Exceeding the maximum environmental ratings may cause irreparable damage to 

the probe and electronics board.

Caution: 

This unpackaged product is susceptible to damage by electrostatic discharge.

11. End of Life Disposal

This product (electrical and electronic equipment) should not be placed in municipal waste. 
Check local regulations for disposal of electronic products.

Содержание Mag900











Отзывы: