Preliminary v09
Subject to techn. changes
5
HOW TO PROGRAM A CHASE:
1 - push the MODE button until a “P” appears in the middle of the display
2 - push the SEL/RUN button to select the “Cxx” (CHASE number xx)
3 - push the or -/LOOP to select the CHASE you want to program (from C06 to C20)
4 - push the SEL/RUN button to select the “Sxx” (SCENE number xx)
5 - push the + or -/LOOP button to select the desired SCENE (from S01 to S10)
6 - push the SEL/RUN button to select the “Dxx” or “Dall” (DEVICE number xx or all the devices together)
7 - push the + or -/LOOP button to select the desired DEVICE (from D01 to D10 or Dall for all of them together)
8 - push the CHASE button to select the “TSxx” (fade in/out time of the colour)
9 - push the + o -/LOOP button to select the time of the fade in/out (from 0 to 30 seconds)
10 - push the CHASE button to select the “TFxx” (permanence time of the colour)
11 - push the + o -/LOOP button to select the time of permanence of the colour (from 0 to 30 seconds)
12 - push the CHASE button to select the “COLxx” (colour from COL00 to COL35)
13 - push the + o -/LOOP button to select the desired colour (one of the 35 pre-setted colour, or COL00 which is off)
Now the first step of the chase is setted, please repeat the step from number 4 for the desired step (up to 10).
To close a CHASE is enough to let the last scene with all the parameters COLxx, TFxx and TSxx setted on “0”.
To modify a scene or a chase you can go through the parameters, select the one you want to change with the SEL/RUN
button and change the value with the + or -/LOPP button.
