Vanguard wiring
harness KB-951
MANUAL
Seite/von:
Dokument:
Stand:
Revison:
4/4
9021-0107-A
02.06.2023
A
E. Connect X4 to charger signal SUB D. Torque by feel.
F. Connect X1 to battery signal. Turn clockwise until
endpoint is reached.
3. Appendix
3.1 Specification
3.2 Electrical
Rated voltage
72 V DC
Rated current
100 A continous
200 A for 10 s
3.2.1 Environmental conditions
Operation temperature
-40 to +70 °C
Storage temperature
-40 to +70 °C
IP rating
IPx6K
3.2.2 Weight and dimensions
Weight
3160 g
Dimensions
Max. length: 1700 mm
3.2.3 Ordering information
Ordering information
Art. No. 0125-0951
3.3 Disposal
If you wish to finally dispose of the product,
ask your local recycling centre or dealer for
details about how to do this in accordance
with the applicable disposal regulations.
3.4 Conformity declaration
For the following designated product it is hereby confirmed,
that the construction in that technical design brought by us
in traffic corresponds to the standards specified below. In
the event of any alternation which has not been approved
by us being made to any device as designated below, this
statement shall thereby be made invalid.
Description
Vanguard wiring harness
Type / Art. No.
KB-951
RoHS Directive
2011/65EU &
Amendment EU2017/2102
We herby declare that our pro-
duct is compilant to the RoHS
Directive on restriction of the
use of certain hazardous sub-
stances in electrical and elec-
tronic appliances.
BARTH
®
Elektronik GmbH
Lengerich, 31.05.2023
Dipl.-Ing. (FH) D. Barth, CEO
© 2023 BARTH Elektronik GmbH | Im Depot 1-3 | D-49838 Lengerich | www.barth-elektronik.de | [email protected]
® BARTH and lococube are registered trademarks of BARTH Elektronik GmbH. All rights reserved to make changes without prior notice.
