5
Rev. 1.4 (01.2021)
The flow-controlled system: mpSmart-Dosing
This Flow Control System is a smart module for precise and regulated dosing of liquids. An on-board
Arduino reads out a flowmeter made by Sensirion, comparing it to a target value and operates the
mp6 micropump corresponding to a PID-regulator. The attached PC-software can be used to monitor,
control and log the flowrate.
Components
mp6-hyb micropump
Damper
Flowmeter (Sensirion SLF3S-1300F)
Tubing
Tubing connectors (Swivel Barb Adapter, 1/16"
ID Tubing)
Driver Board
Software with GUI
mp-hc
min. Flowrate
0.5 ml/min
max. Flowrate
8 ml/min
accuracy
<±5%
software calibration
Water
USB-port
one
input voltage
5V
operating temperature
+5°C bis +45°C
material in contact with fluid
PPSU, FKM, PP, PPS, stainless steel, Tygon,
epoxy
–
based adhesive
lifetime
5000 h
self-priming
yes
dimensions (electronic board)
80x60x18 mm³
weight (electronic board)
38 g
power consumption (maximum/stand by)
365 mW/232 mW
power supply
Via USB; 5 V
pumping media
Liquid (water)
