Predator 32N
Owner’s Manual
OIPB-I02001-PREDATOR32N_V1.0 9 |
P a g e 0 1 / 0 7 / 1 9
6.MAINTENANCE
Clean machine after every use. To clean machine, use a low-pressure water hose or air
pressure. Do not use a high PSI pressure washer. This could force water into areas of the
machine unintentionally and damage parts. A regular inspection of machine for wear and
damage should be done on a regular basis. If any parts have been damaged or have excessive
wear, they should be replaced. If belt is needing replaced, please see separate instructions.
7.TROUBLESHOOTING
1.
Check to see if main power supply is on.
2.
Check to see if emergency stop is pushed down; if it is, pull up.
3.
Check to see if manual speed pot is turned up past 1.
4.
Check all cords ends for loose connection.
5.
Check fuse in distribution box with test meter.
6.
Check to see if all phase are with right voltage (check with voltmeter).
7.
Check the converter connector cable to motor.
8.
Check for error message on display of the converter.
