10
3. Back Panel Controls
AC Line
The AC Line input is an IEC type connection for use with an appropriate IEC-terminated line cord
for connection to an AC power source. The line voltage specification printed underneath the
connector outlet indicates the required voltage and frequency of the power source. This
specification will vary depending on the country to which the amplifier was shipped, so please
refer to the voltage specification printed on the back panel of your amplifier, as it may be
different from that shown in the illustration above.
IMPORTANT: The MAINS power applied must match the voltage and frequency specification
printed on the back panel of your amplifier.
Fuse
It is essential that the correct fuse be installed for proper operation and safety. The fuse
protects the amplifier and the user in case of equipment faults and voltage spikes on the ac
power source.
The fuse rating varies depending on the country to which the amplifier was shipped, so please
refer to the fuse specification printed on the back of your amplifier. You must use a fuse that
matches the fuse specification printed on the back panel of your amplifier (which may be
different than that shown in the illustration above).