Bartec TC77ex-NI, Быстрый старт

Страница: 35 / 44

TC77
ex
-NI - Touch Computer
Type B7-A26*-***3/********
Operation
Subject to technical changes.
01/2021
29/36
7.1.4 Charging the Main battery
7.1.4.1 In Base station
1. Charge the battery only outside hazardous areas.
2. Connect the base station to a power source.
3. Place the bottom of the device into the base station.
4. Rotate the top of the device until the connector on the back of the device mates with
the connector on the cradle.
5. Ensure the device is connected properly. The charging Charging/Notification LED on
the device begins blinking amber indicating that the device is charging.
7.1.4.2 Charge LED Indicator
Status Indications
Off • The battery is not charging.
• The device is not inserted correctly in the base station
or connected to a power source.
• Base station is not powered.
Slow Blinking Amber
Every 4 seconds • Battery is charging, but the battery is fully depleted and
does not yet have sufficient charge to power the device.
Solid Green Battery charging is complete.
Fast Blinking Amber
(2 blinks/second) Charging error.
• Temperature is too low or too high.
• Charging has gone on too long without completion
(typically eight hours).
Slow Blinking Red
Every 4 seconds The device is charging but the battery is at end of useful
life.
Solid Red Charging complete but the battery is at end of useful life.
Fast Blinking Red
2 blinks/second Charging error but the battery is at end of useful life.,
• Temperature is too low or too high.
• Charging has gone on too long without completion
(typically eight hours).