Bartec TC26ex-NI, Быстрый старт

Страница: 51 / 64

TC26
ex
-NI - Touch Computer
Type B7-A2C*-****/********
Operation
Subject to technical changes.
June 2022
45/56
8.1.6 Hand strap
The hand strap provides securing when holding the device.
DANGER
Non certified accessories endanger explosion protection.
Danger to life exists in hazardous areas!

Only use the Hand strap from BARTEC with type B7-A2Z0-0079
To install the Hand strap on the device:
1.
Install or replace the handstrap only outside hazardous areas.
2. Feed the top end of the hand strap through the slot at the top of the device.
3. Pull the end through the slot.
4. Insert the other end of the hand strap into the hand strap slot on the bottom of the
device.
5. Pull the hand strap until the clip snaps into the slot.
6. Place hand between device and hand strap and adjust hand strap as necessary.