Datei: en_userguide_bartec_tc7x_scanhandle.docx - Datum: 16.03.2020
2
Product Information USER GUIDE
SCAN HANDLE
FOR EX-APPROVED TOUCH COMPUTER
TC 7x SERIES
© BARTEC GmbH 2019 – Subject to changes and amendments, errors expected
2.
REMOVAL
Push the right holder of the handle until it moves above the right side
of the TC7x. Turn the TC7x out of the handle.
3.
PTT-BUTTON REMAPPING
The Scan Handle uses the PTT-
Button to trigger the scanner.
Please remap the PTT-Button
with the following instructions:
1.
Start Settings->Key
Programmer
2.
Click on button with key
event “LEFT_TRIGGER_2”,
default setting is “BUTTON_L2”
3.
Select “BUTTON_L1”
4.
Ready, screenshot on the
right shows the remapped
“LEFT_TRIGGER_2” on event
“BUTTON_L1” for Scan Handle
usage
4.
STYLUS MOUNTING
For easy access to the
TC7x stylus the Scan
Handle provides a
holder for the stylus
and a hole to mount
the stylus cord. The
picture shows the
Scan Handle with
mounted stylus.
5.CARE
Do not use oil to lubricate
the mechanism. Oil
detracts plasticizers from
the material, the plastic
parts become brittle.
Do not use harsh chemicals,
cleaning solvents or strong
detergents to clean the Scan
Handle. Clean the Scan
Handle with a damp cloth.