Bartec POLARIS SMART HMI 17-71V6-1 Series, Руководство пользователя

Страница: 45 / 60

POLARIS SMART HMI - for Zone 1/21
POLARIS Smart HMI 7” W
Operation
Technical data subject to change.
04/2018
EN 39/54
8.6.2 Start of the device in the Recovery mode
To change in the Recovery mode, one must press the F6 key while booting up the device.
This possibility is available for approx. 10 sec. During this time the announcement "
Press
F6 key to start Bartec Recovery"
appears on the screen.
ATTENTION
All data on Windows partition are definitely extinguished during the recovery of
process!
All self-provided data or use data should be protected from starting the recovery.
For the Recovery mode the hard disk contains a hidden partition to the storage of the
Recover engine and the image file (effigy of the operating system). If the Recovery
partition exists not any more or is damaged, the device can be restored only from an
external medium or USB Flash drive.
The hidden partition is approx. 10 GB. That's why the available storage space on the
hard disk is lower than the given capacity.
8.6.3 Recovery surroundings
The Recovery mode bases on a slender Windows operating system or so-called PE
surroundings (Windows Preinstallation Environment). Besides, Windows starts only with a
basic equipment of services and drivers.
Illustration 10: Start Windows PE.