Bartec POLARIS II PROFESSIONAL, Руководство пользователя

Страница: 24 / 54

Technical Data
POLARIS PROFESSIONAL
POLARIS II Panel PC
16/45
Technical data subject to change without notice.
07/2018
6. Installation
We recommend setting up the complete system under laboratory conditions and testing
it before it is permanently installed. If a long connection cable is not available, please use
a patch cable to test the basic functions.
DANGER
Electrostatic charging through a stream of particles.
There is a risk of fatal injury in an explosive atmosphere!
Make sure there are no highly energetic charging mechanisms at the user interface
on the display unit or its accessories.
Do not install the device in the stream of particles.
DANGER
No PE connection.
Risk of fatal injury in an explosive atmosphere!!
The POLARIS must be integrated in the equipotential bonding.
6.1 Requirements
The surface underneath and the fastening means for the supporting system must be
designed to support the weight of the POLARIS (approx. 17 kg).
Choose the optimum height for operating the POLARIS.
Ensure good lighting conditions for a perfectly legible display (no direct exposure to
the sun’s rays).
Do not mount in direct proximity to switching or current changing devices.
Do not install the device in the stream of particles.
The POLARIS must be integrated in the equipotential bonding.
At ambient temperatures below 0 °C, the POLARIS has to be heated (Heating on
request).
The supply and data line(s) are laid in the supporting system.
The supporting system is fastened by means of the flange plate (see the following
illustrations).