Scope :
USER MANUAL
DE8-BC Ex d Empty Enclosure
Date:
02.04.2022
Ver.:
3
QA Code:
5
Checked by:
E.T.
Approved by:
S.Gr.
Page:
3
of 8
Document no. :
21469
The passing on and copying of this document and the use or communication of it’s contents are forbidden without express authority.
Offenders are liable to payment of damages. All rights are reserved in the event of the registration of a patent .
Example of the type label that shall be mounted inside the enclosure:
Description of the component
Our DE8-BC range of flameproof enclosures is available in many sizes. They are made of
welded and machined acid resistant stainless steel 316L or painted carbon steel. Each is
expected to receive electrical components inside, making service and maintenance easy.
They can also be customized to meet each individual specific need. If necessary, multiple
enclosures can be assembled on a frame with or without combined Ex e junction boxes.
The enclosures are delivered with Ex Component certificate (U-certificate) to be used
as basis for further certification of an Ex Equipment or Protective System.
Meaning of symbols
This symbol means a hazard and precaution to be taken
Safety instructions
The device must be installed, used and maintained in accordance with the following
standards:
•
IEC/EN 60079-0 (Explosive atmospheres - Part 0:
Equipment - General
requirements
)
•
IEC/EN 60079-1 (Explosive atmospheres - Part 1: Equipment protection by
flameproof enclosures "d")
•
IEC/EN 60079-14 (Explosive atmospheres - Part 14: Electrical installations design,
selection and erection)
•
IEC/EN 60079-17 (Explosive atmospheres - Part 17: Electrical installations inspection
and maintenance)
•
IEC/EN 60079-31 (Explosive atmospheres - Part 31: Equipment dust ignition
protection by enclosure "t")
•
Decrees, orders, laws, directives, circulars, applications, standards, state of art and
other documentation relating to its installation site
It is forbidden to change anything without the prior written consent of Bartec
Technor unless the enclosure undergoes a full Equipment certification at a Notified
Body/Certification Body.
We cannot accept any responsibility for failure to observe these regulations:
•
Make sure of the compatibility between the information on the nameplate, the
explosive atmosphere present, the area of use and ambient temperatures on surfaces
•
Any damage on the device can cause the flameproof protection to become ineffective
•
The installation of the enclosure must be done in the state of the art in the technical
domains and only by qualified, competent and empowered personnel
