Bartec 17-21BA-M31S Series, Руководство пользователя

Страница: 27 / 56

Barcode Hand Scanner
BCS 160
ex
Series, Types 17-21BA-M31S/…….. and 17-21BA-M32S/……..
Technical Data
Technical data subject to change without notice.
Revision A / Status: 01/2014
21/48
4. Transport and Storage
4.1 Transport
Report any transport damage or incomplete deliveries in writing to the forwarding
company and to BARTEC GmbH immediately on receipt of the deliveries.
Any damage caused by incorrect storage will not be covered by BARTEC GmbH’s
guarantee provisions.
4.2 Storage
ATTENTION
Damage to property due to incorrect storage!

Observe storage temperatures.

Keep the hand scanners away from moisture.
Additional information on the batteries
The BARTEC batteries (type 17-21BE-M040/0000) are developed and manufactured in
accordance with the highest industrial standards. The operating time or storage period of
a battery is limited however. The actual lifetime of a battery is influenced by various
factors, e.g. heat, cold, rough operating environment and falling from a great height. If a
battery is kept longer than six months, the performance may be impaired permanently.
Keep the batteries in a cool, dry place. For longer periods of storage, take the batteries
out of the device to prevent self-discharge, rusting of metal parts and the leakage of
electrolyte.
Batteries kept for a period of 6 months or longer should be charged and discharged again
at least every 3 months. If electrolyte escapes, do not touch the areas affected and
dispose of the batteries as prescribed. Replace the battery if the operating time becomes
much shorter.
The standard guarantee period for all BARTEC batteries is six months, whereby it is
irrelevant whether the battery was acquired separately or if it was included in the scope of
supply of the BCS 160
ex
BT.